Dell UltraSharp 27 User Manual page 13

7
Thunderbolt
upstream
8
USB-C
upstream port
9,10,
12,14 Super speed USB
10 Gbps (USB 3.2
Gen2) (4)
11
Audio line-out
port
13
RJ45 connector
(2.5G)
15
USB-C
downstream port
16 Stand lock
Connect to your computer using the Thunderbolt
The
Thunderbolt
TM
4
rate (USB 3.2 Gen 2), TBT mode and the alternate mode
with DP 1.4 support the following, and 20 V/4.5 A, 15 V/3 A,
9 V/3 A, 5 V/3 A.
Maximum resolution of 2560 x 1440 at 120 Hz.
This model will feature
have a 90W power delivery, it is recommended for use the
following Dell's products that meet the fire enclosures.
NOTE:
Thunderbolt
Windows versions that are prior to Windows 10.
Connect to your computer using the USB cable
(Thunderbolt
cable is connected, you can use the USB downstream
connectors on the monitor.
Connect your USB device. You can use these ports only
after you have connected the USB cable (Thunderbolt
cable, A to C or C to C) from the computer to the monitor.
Port with
1.2.
Connect speakers to playback audio through HDMI or
DisplayPort audio channels. Only two-channel audio is
supported.
NOTE: The audio line-out port does not support
headphones.
Connect Internet. You can surf Internet via RJ45 only
after you have connected the USB cable (Thunderbolt
cable, A to C or C to C) from the computer to the monitor.
Port with
Connect your USB device. You can use this port only after
you have connected the USB cable (Thunderbolt
cable, A to C or C to C) from the computer to the monitor.
Lock the stand to the monitor using a M3 x 8 mm screw
(screw not included).
TM
upstream offer the fastest transfer
4
Thunderbolt
TM
upstream is not supported on
4
TM
4 cable, A to C or C to C). Once the USB
battery icon supports Battery Charging Rev.
icon supports 5 V / 3 A.
About your monitor
TM
TM
technology and will
4
TM
4
cable.
TM
4
TM
4
| 13