Safety Precautions - EverFocus VANGUARD II 16x8H Plus Quick Installation Manual

Refer all work related to the installation of this product to qualified service personnel or system installers.
 Do not block the ventilation openings or slots on the cover.
 Do not drop metallic parts through slots. This could permanently damage the appliance. Turn the power off
immediately and contact qualified service personnel for service.
 Do not attempt to disassemble the appliance. To prevent electric shock, do not remove screws or covers.
There are no user-serviceable parts inside. Contact qualified service personnel for maintenance. Handle the
appliance with care. Do not strike or shake, as this may damage the appliance.
 Do not expose the appliance to water or moisture, nor try to operate it in wet areas. Do take immediate
action if the appliance becomes wet. Turn the power off and refer servicing to qualified service personnel.
Moisture may damage the appliance and also may cause electric shock.
 Do not use strong or abrasive detergents when cleaning the appliance body. Use a dry cloth to clean the
appliance when it is dirty. When the dirt is hard to remove, use a mild detergent and wipe gently.
 Do not overload outlets and extension cords as this may result in a risk of fire or electric shock.
 Do not operate the appliance beyond its specified temperature, humidity or power source ratings. Do not
use the appliance in an extreme environment where high temperature or high humidity exists. Use the DVR
at temperatures within 0°C~40°C / 32°F~104°F (Storage). The input power source is

Read Instructions
All the safety and operating instructions should be read before the unit is operated.

Retain Instructions
The safety and operating instructions should be retained for future reference.

Heed Warnings
All warnings on the unit and in the operating instructions should be adhered to.

Follow Instructions
All operating and use instructions should be followed.

Cleaning
Unplug the unit from the outlet before cleaning. Do not use liquid cleaners, abrasive or aerosol cleaners. Use
a damp cloth for cleaning

Attachments
Do not use attachments not recommended by the product manufacturer as they may cause hazards.

Safety Precautions

.
12VDC 5A