NEC MultiSync FE700+ User Manual page 14

Hide thumbs Also See for MultiSync FE700+:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Immediately unplug your monitor from the power outlet and refer
servicing to qualified service personnel under the following conditions:
• When the power supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the monitor.
• If the monitor has been exposed to rain or water.
• If the monitor has been dropped or the cabinet damaged.
• If the monitor does not operate normally by following operating
instructions.
• Allow adequate ventilation around the monitor so that
• The power cable connector is the primary means of
CAUTION
• Handle with care when transporting. Save packaging
CORRECT PLACEMENT AND ADJUSTMENT
SHOULDER AND NECK FATIGUE. CHECK
THE FOLLOWING WHEN YOU POSITION THE
• Adjust the monitor height so that
the top of the screen is at or
slightly below eye level. Your eyes
should look slightly downward
when viewing the middle of the
screen.
• Position your monitor no closer
than 40 cm and no further away
than 60 cm from your eyes. The
optimal distance is 50 cm.
• Rest your eyes periodically by
focusing on an object at least 6 m
away. Blink often.
• Position the monitor at a 90° angle to windows and other light
sources to minimize glare and reflections. Adjust the monitor tilt so
that ceiling lights do not reflect on your screen.
01c_english
heat can properly dissipate. Do not block ventilated
openings or place the monitor near a radiator or other
heat sources. Do not put anything on top of the monitor.
detaching the system from the power supply. The
monitor should be installed close to a power outlet
which is easily accessible.
for transporting.
OF THE MONITOR CAN REDUCE EYE,
MONITOR:
English-7
7
11.09.2000, 7:57 Uhr

Advertisement

Table of Contents
loading

This manual is also suitable for:

N0701

Table of Contents