1. Manuals
  2. Brands
  3. North Star Manuals
  4. Cleaning Equipment
  5. 1572215
  6. Owner's manual

North Star 1572215 Owner's Manual

Soft wash brush
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Instructions for Assembly, Testing, Operation, Servicing, and Storage
Soft wash brush: For using with soft wash systems to gently agitate soft wash mix**
READ and UNDERSTAND this Owner's Manual completely before using this brush.
Assemble, test, and use only in accordance with this Owner's Manual instructions.
EXERCISE CAUTION when mixing chemicals as incorrect ratios or mixtures could release
harmful gases.
READ and FOLLOW chemical label instructions.
KNOW emergency procedures BEFORE handling chemicals. Leaks, bodily chemical contact,
poisoning, and spills require immediate response.
AVOID inhaling, ingesting, or coming into contact with any chemicals.
WEAR personal protective gear when using the brush.
KEEP chemicals away from children and pets. Some chemicals are especially toxic to them.
SOAK vegetation in the area surrounding the work zone well prior to and after applying bleach.
Bleach can kill vegetation if not rinsed thoroughly.
ALWAYS keep a fire extinguisher rated "ABC" nearby.
Improper handling of chemicals could result in serious injury or illness to the operator or
nearby persons/animals or could cause damage to the environment.
**This brush is recommended for use in applying bleach concentrations of 3% or less. The brush will be damaged, and warranty
voided if used to apply any petroleum-based product (gasoline, diesel, kerosene, or oil). WE RECOMMEND THAT THE BRUSH
NOT BE USED FOR OTHER PURPOSES ONCE IT HAS BEEN USED FOR BLEACH. Any chemical will leave some residual,
even after the brush has been properly cleaned. These residual chemicals can have unexpected effects on future uses. This brush
should not be used by people with reduced physical, sensory or mental capabilities or lack of experience and knowledge.
Any Questions, Comments, Problems, or Parts Orders
Call NorthStar Product Support at 1-800-270-0810
Owner's Manual
WARNING
M1572215A
ITEM NUMBER: 1572215
SERIAL NUMBER: _____________

Advertisement

Table of Contents
loading

Summary of Contents for North Star 1572215

  • Page 1 M1572215A ITEM NUMBER: 1572215 SERIAL NUMBER: _____________ Owner's Manual Instructions for Assembly, Testing, Operation, Servicing, and Storage Soft wash brush: For using with soft wash systems to gently agitate soft wash mix** WARNING READ and UNDERSTAND this Owner's Manual completely before using this brush.
  • Page 2 Hazard Signal Word Definitions...

  • Page 3: Table Of Contents

    Table of Contents Intended Use .............................. 4 Summary of Important Safety Information ..................5-6 During Assembly During Operation • General Chemical Safety • Chemical Application Safety • Chemical Accident Procedures Warning Label Locations ........................... 7 Component Inventory Unpacking ..............................8 Assembly ..............................

  • Page 4: Intended Use

    Intended Use The soft wash brush is intended for use with bleach concentrations of 3% or less. APPLYING CHEMICALS: Hazardous chemicals must be handled with caution as directed throughout this manual and on the chemical label. Always rinse the brush after each use to clean the chemical out of the lance, brush head, and coupler.

  • Page 5: Summary Of Important Safety Information

    Summary of Important Safety Information WARNING Read and understand this owner's manual completely before using the brush. Read each chemical label's instructions before handling the chemical. Improper handling of chemicals could result in serious injury or illness for the operator or nearby persons/animals, or cause damage to the environment.

  • Page 6: Chemical Accident Procedures

    Summary of Important Safety Information (continued) Chemical accident procedures Immediate response is necessary in the event of leaks, bodily chemical contact, poisoning, or spills. See instructions below: Brush leak If the brush develops a leak, immediately stop use. Follow directions below, as applicable.

  • Page 7: Warning Label Locations

    Warning Label Location Part# Description 802079 Warning Label Always make sure safety labels are in place and in good condition. If a safety label is missing or not legible, order new labels or unsafe operation could result. To order replacement safety labels, call NorthStar Product Support at: 1-800-270-0810.

  • Page 8: Unpacking

    Unpacking Closely inspect all contents in the shipping carton. If you have missing or damaged components, please contact NorthStar Product Support at: 1-800-270-0810. Brush Lance Assembly Brush Head Fitting, G1/4” x 3/4” ACME – 801322 (Qty 1) 801319 Fitting, G1/4” x QC Plug – 801323 (Qty 1) (Qty 1) Lance –...

  • Page 9: Assembly

    Assembly Step One: Install brush head. Tools Needed • • Thread brush lance assembly into brush head until tight. Screwdriver • Install screw to keep head from rotating during use. Screw, M4 x 20mm self-tapping Brush head Brush lance assembly...

  • Page 10: Preparing The Brush For Each Use

    Operation – Preparing the Brush for Each Use If brush has been used previously, it must be prepared BEFORE EACH SUBSEQUENT USE. WARNING • • Read instructions below carefully for inspecting and preparing the brush. • Damaged or clogged equipment could result in leaks or uncontrolled spray. •...

  • Page 11: Using The Brush

    Operation – Using the Brush Step 1: Clear work area. 1. Clear work area Clear the work area of all bystanders and pets. Restrict access by the public for the period recommended on chemical labels. 2. Prep work area Complete the following before use: Cover all electrical outlets and light fixtures on surfaces near the work area.

  • Page 12: Step Three: Clean Brush And Decontaminate After Use

    Operation - Using the Brush (continued) Step 3: Clean brush and decontaminate after use. When finished using the brush, it is important to clean the brush and decontaminate yourself. WARNING • Clean-up and decontamination procedures must be followed after each use. •...

  • Page 13: Exploded View And Parts Breakdown

    Exploded View and Parts Breakdown – Rev A Ref # Part # Description 801319 Brush head Fitting, G1/4” x 3/4”-5 ACME 801322 Fitting, G1/4” x QC plug 801323 801324 Lance 801326 Gasket, fitting 801392 Screw, M4 x 20mm self-tapping...

  • Page 14: Limited Warranty

    Limited Warranty Dear Valued Customer: The NorthStar product you just purchased is built with the finest material and craftsmanship. Use this product properly and enjoy the benefits from its high performance. By purchasing a NorthStar product, you show a desire for quality and durability.
  • Page 15 This page has intentionally been left blank.
  • Page 16 Manufactured by Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.com Made in China...

Table of Contents