Siemens SIMATIC NET RUGGEDCOM RX1511 Installation Manual page 25

Installing the Device
2.5.2 Connecting Low DC Power
Figure 2.11
2. Connect the positive wire from the power source to the positive (+) terminal on
the terminal block.
3. Connect the negative wire from the power source to the negative (-) terminal on
the terminal block.
4. For screw terminal blocks, install the safety cover.
Figure 2.12
16
All manuals and user guides at all-guides.com
Ground Terminal
6
DC Terminal Block Wiring – Screw Terminal Block for -12P, -24P and -48P Pow-
er Supplies
Screw
1
Safety Cover
2
Screw Terminal Block
3
RUGGEDCOM RX1511 Device
4
Assembling the Safety Cover
4
3
2
1
RUGGEDCOM RX1511
Installation Manual, 12/2019, C79000-G8976-1056-16