Bissell SPOTBOT 1711 Series User Manual page 5

Special Features
Front view
4 - Preset Cleaning Cycles control paneI
4
Located on top of the unit, you will find the
control panel. Select the cleaning cycle you
would like to use (detailed instructions on
page 9). The "Power" and "Done" are not but-
tons; "Power" is an indicator light to tell you
when the SpotBot is "on". "Done" is an indicator
light to tell you when the cleaning cycle is done.
8 - Spray trigger
Press the spray trigger to release water and
formula onto the area to be cleaned. (Only use
in hose/tool mode)
11 - Vacuum flex hose
Wraps around the center of the unit, and serves
as the travel path for dirty water and formula
suctioned into the dirty water/collection tank.
8
The hose can also be unwrapped and used with
the tough stain tool for manual cleaning in hose/
tool mode.
Underside view
15 - Advanced Brushes
Scrub, clean and groom carpet.
16 - Suction nozzles
Provides suction path when using the
handsfree cleaning cycles.
11
Back view
13 - Tough Stain Brush™ Storage
Stored on board for your convenience.
14 - Cleaning window
Provides an area to see the hands-free
cleaning action.
NOTE: Unwrap power cord
completely before operating the unit.
15
16
13
14
5
www.BISSELL.com