Introduction; Automatic Adjustment; Area Of Application - ABB TZIDC Manual

Digital positioner

Hide thumbs Also See for TZIDC:

TZIDC, TZIDC-200 DIGITAL POSITIONER | TD/TZIDC/TZIDC-200/NON-CONTACT_SENSOR-EN REV. A

1 Introduction

The standard automatic adjustment for rotary and linear

actuators is performed as described in the operating

instructions under Standard automatic adjustment.

For different installation situations, such as gear rack actuators

or valves that do not feature mechanical restrictions or that

could be damaged when activating the end positions, the user

has to manually configure the relevant parameters during

commissioning.

The parameter settings are described in this Technical

description.

Also observe the operating instructions for the positioner.

The configurations described in this Technical description apply

only to digital positioner TZIDC / TZIDC-200 from HW-REV.:

05.01.xx and order option "S1 – Contactless sensor".

Table of Contents

Tzidc-200