Maintenance; Removing The Door - Whirlpool AKZM 8920 User And Maintenance Manual

Induction Plate:
• When cool to the touch, use a sponge and suitable liquid detergent for ovens or hobs. Do not clean
the induction plate in a dishwasher.
Internal Electrical Socket:
• Remove the metallic plug cover; use a humidified sponge to clean the plug. Do not use metallic and/
or sharp tools.
Cooking Vessel:
• Suitable for dishwashing. Alternatively, use soft sponge and suitable liquid detergent.

MAINTENANCE

WARNING

REMOVING THE DOOR

To remove the door:
1. Open the door fully.
2. Lift the catches and push them forwards as far as they will go (Fig. 1).
3. Close the door as far as it will go (A), lift it up (B) and turn it (C) until it is released (D) (Fig. 2).
To refit the door:
1. Insert the hinges in their seats.
2. Open the door fully.
3. Lower the two catches.
4. Close the door.
Fig. 1 Fig. 2
REMOVING THE SIDE GRILLES
The accessory-holder grilles are equipped with two fixing screws (fig. 1) for optimum stability.
1. Remove the screws and fixing plates on the right and left with the aid of a coin or tool.
2. To remove the grilles, lift them up (1) and turn them (2) as shown in fig. 3.
Fig. 1
- Use protective gloves.
- Ensure the oven is cold before carrying out the following operations.
- Disconnect the appliance from the power supply.
Fig. 2 Fig. 3
EN8