Rear Wheel Assembly - Coleman GK200 Assembly Manual

Hardware:
M20 Washer
M20 Castle nuts 2ea. (2)
Cotter pins
M20 Large
Washer
1.Lift the Kart with a jack.
Note: Make sure tire tread faces forward
and Air valve stem is on the outside of the
tire when installing.
2. Install rear tire assembly in the
following order:
1. Wheel
2. M20 Large washer (4)
3. M20 Washer (1)
4. M20 Castle nut (2)
5. Colter pin (3)
WARNING
!
Failing to install cotter pins
could be hazardous.
Failing to install cotter pins
could cause the castle nuts
to fall off resulting in an
accident.
Never operate Go Kart
without cotter pins installed.
3.Install Hub Caps (5) by snapping on hub.

REAR WHEEL ASSEMBLY

1
2ea. (1)
2ea. (3)
2ea. (4)
Make sure
the trend
faces
forward
2
4
1
2
3
5
3
3
4