Pre-Ride Inspection - Coleman GK200 Assembly Manual

Inspecting and checking the
condition of the Go Kart
before each ride is important.
Following the pre-ride check
list will help insure the you do
not have mechanical
problems which could result
in injury or becoming
stranded. Make sure the Go
Kart is in good operating
condition before each ride.
WARNING
!
Failing to inspect and
maintain your Go Kart could be
hazardous.
Not following the pre-ride inspection
procedures could result in loosing
control of the Go Kart resulting in an
accident or damage to the Go
Kart
Always perform a Pre-ride
inspection before each ride.
WARNING
!
Performing maintenance and
checks while the engine is running
could be hazardous.
You could be severely injured by
moving parts or hot surfaces.
Never perform maintenance or
check procedures while the
engine is running with the exception
of checking the ignition switch or
throttle.

PRE-RIDE INSPECTION

WHAT TO CHECK FOR
CHECK
Steering •
•
Brakes •
•
•
Tires •
•
•
Fuel Tank •
•
•
Throttle •
Pedal
•
Engine •
Ignition
switch •
Engine •
Oil
Torque •
Converter •
Guard
Drive •
Chain •
•
General •
Condition
•
10
Smoothness
No restriction of
movement
Correct fluid level
Inspect hoses for
leaks
Inspect brake pads
for wear.
Proper tire pressure
Proper tread depth
Rubber has no
cracks
Enough fuel for the
ride
Fuel cap secure
Hoses have no
signs of cracks or
leaks
Pedal snaps back
to idle when
released
Operates freely
Switch shuts off
engine when
activated.
Correct oil level
No damage
Securely attached
Proper tension
Lubricated
No excessive wear
or damage
All nuts and bolts
tight
No rattles from
engine or frame
while running