SCAN REVERT
The Scan Revert channel is the channel selected when you press the PTT switch to
transmit during scan. Your dealer can program one of the following types of Scan Revert
channels:
•
Selected: The last channel selected before scan.
•
Selected + Talkback: Same as "Selected", plus you can respond to calls on the
channel at which scan is paused.
•
Priority: The Priority channel.
•
Priority + Talkback: Same as "Priority", plus you can respond to calls on the channel
at which scan is paused.
•
Last Called + Selected: The last channel on which you receive a call.
SCAN DELETE/ADD
You can add and remove zones and/or channels/group IDs to and from your scan list.
1 Select your desired zone and/or channel/group ID.
2 Press the key programmed as [Zone Delete/Add] (to add/remove zones) or [Scan
Delete/Add] (to add/remove channels/group IDs).
•
You can also press and hold the key programmed as [Scan Delete/Add] to add/
remove zones.
•
When a channel/Group ID is added to scan, the
the display.
•
When a zone is added to scan, the
icon appears on
icon appears on the display.
9