Table of Contents
Advertisement
Getting Started
Welcome to the World of
Connecting the TV
Cable System
and/or VHF/UHF
Antenna System
Thank you for purchasing this Sony LCD Color Television. This manual is
for model KLV-23S200A, KVL-26S200A, KLV-32S200A and
KLV-40S200A. The packing box contains accessories that are listed on page
42.
For optimum picture performance, your new BRAVIA TV is capable of
receiving HDTV content from a cable or satellite box via the video inputs
(HDMI and YP
P
component video; see page 15).
B
R
To display clear, crisp pictures, your TV must be connected properly. To
properly connect your TV, follow the basic connections provided in this
section. Advanced connection examples are provided in the separate Quick
Setup Guide accompanied with your TV. The Quick Setup Guide provides a
variety of optional equipment connection diagrams.
It is strongly recommended that you connect the antenna/cable input using the
supplied 75-ohm coaxial cable to receive optimum picture quality. A 300-ohm
twin lead cable can be easily affected by radio frequency, resulting in signal
deterioration.
When the antenna/cable connection is done, you must perform an Initial Setup
so your TV will create a list of channels you can view (see page 18). After you
can receive and view programming you should select the proper Wide Mode
setting to display the picture in your preferred aspect ratio. See "Changing the
Wide Screen Mode" on pages 20 and 28.
Connecting a cable system or an external VHF/UHF antenna to the
VHF/UHF input will allow you to enjoy standard definition programming.
Cable or VHF/UHF (or VHF only)
75-ohm coaxial
cable (supplied)
TM
Rear of TV
VHF/UHF input
(Continued)
11
Hide quick links:
Advertisement
Table of Contents
