Philips SP9883/36 Manual page 45

Using the Quick Clean Pod
SP9883_EN_A6_cc2020_0302.indd 44 SP9883_EN_A6_cc2020_0302.indd 44
4 Press the small circular piece on the handle of the
Quick Clean Pod Cartridge to break the snap hook on
the handle.
5 Place the Quick Clean Pod Cartridge into the Quick
Clean Pod.
6 Put the top of the Quick Clean Pod back onto the
base and turn it clockwise until you hear a click.
Do not tilt the Quick Clean Pod to prevent leakage.
Note: If you use the shaver with shaving foam, shaving
gel or pre-shave products, thoroughly rinse the shaving
heads before you use the Quick Clean Pod.
Always shake excess water off the shaver before you
place it in the Quick Clean Pod.
1 Place the shaver upside down into the Quick Clean
Pod. The shaver automatically detects that it is in the
Quick Clean Pod.
2 Switch on the shaver to start the cleaning program.
44
English
2023/03/02 18:19 2023/03/02 18:19