Philips Q Line 32BDL3650Q User Manual page 57

Human sensor
Choose to turn on or off the human sensor function of
CRD41.
Configuration 1 reset
Reset all settings in Configuration 1 menu to factory preset
values.
Factory Reset
Reset all customized settings in Picture, Screen, Audio,
Configuration 1, Configuration 2 and Advanced Option to
the factory default values.
7.2.5. Configuration 2 menu
Picture OSD turn off
Screen OSD H position
Audio OSD V position
Con�guration 1 System rotation
Con�guration 2 Information OSD
Advanced option Logo
Monitor ID
Heat status
Monitor information
DP Version
HDMI Version
Con�guration2 reset
OSD turn off
Set the period of time the OSD (on-screen display) menu
stays on the screen.
The options are {Off, 5 - 120} seconds. {Off} does not
disappear automatically.
OSD H position
Adjust the horizontal position of the OSD menu.
OSD V position
Adjust the vertical position of the OSD menu.
Rotation
Change OSD and Android to Landscape / Portrait mode.
Note: Video inputs will not rotate with this setting.
Note: If Android APK plays video content, user MUST stop
and re-play to get correct video image.
Information OSD
Set the period of time the information OSD display on the
upper left corner of the screen. The information OSD will
display when input source and signal are changed.
The options are {Off, 1 - 60} seconds.
Logo
Choose to enable or disable the picture of Logo when
turning on your display.
• {Off} – Both static Philips logo and Android boot
animation will not be shown.
• {On} – Default value. Both Philips logo and Android boot
animation will be shown.
• {User} – Static Philips logo will not be shown, only user-
selected boot animation will be shown in Android
settings.
Note: Logo will not be rotated even thought rotation setting
is set.
Monitor ID
Set the ID number for controlling the display via the RS232
connection. Each display must have a unique ID number
when multiple sets of the display are connected. Monitor ID
number range is between 1 and 255.
•
•
Heat Status
Current thermal status.
Monitor information
Shows information about your display, including model
name, SW version, serial number, and operation hours.
45
50
50
Landscape
10
On
Action
24.21°C 75.57°F
Action
1.1
1.4
DP version
Action
Change DP version. 1.1 or 1.2.
HDMI version
Set the HDMI version to 1.4 or 2.0.
Note: HDMI input source only.
Configuration 2 reset
Reset all settings in Configuration 2 menu to factory preset
values.
7.2.6. Advanced Option menu
IR control
Select the operation mode of the remote control when
multiple displays are connected via RS232 connection.
•
•
•
55
{Monitor ID} set range in {1-255}. The default setting is 1.
{Monitor group} set range in {1-254}. The default setting
is 1.
Monitor information
Model name
Serial NO.
Operation hours
SW Version
Picture IR control
Screen Power LED Light
Audio Keyboard control
Con�guration 1 Tiling
Con�guration 2 Off Timer
Advanced option Date and time
Schedule
HDMI with One Wire
HDMI One Wire Power off
Auto signal detection
Language
OSD transparency
Power Save
{Unlock} - All displays can be operated normally by the
remote control unit.
{Primary} - Designate this display as the primary display
for remote control operation. Only this display can be
operated by the remote control. (In primary mode, IR key
will always be processed regardless of the monitor ID/
group settings).
{Secondary} - Designate this display as the secondary
display. This display cannot be operated by the remote
32BDL3650Q
N/A
0
FBXX.XX
Unlock
On
Unlock
Action
Off
Action
Action
Off
Off
Off
English
Off
Mode 1