- Turntable
- Tonearm
- Tonearm lifter
- Tonearm rest
- Tonearm lock
| - Place the vinyl record onto the turntable.
- Remove the stylus cover by gently sliding the cover away from the tonearm.
- Push the tonearm lock aside to unlock the tonearm.
- Use the tonearm lifter to lift the tonearm or manually lift the tonearm.
- Place the tonearm onto the outer edge of the vinyl record. The turntable starts to rotate and play the vinyl record automatically.
- Lift the tonearm. Place the tonearm into the tonearm rest.
- Engage the tonearm lock to lock the tonearm.
- Remove the vinyl record from the turntable.
Note: Before transport, make sure that the tonearm is locked. |
- 45 rpm adapter
| - Use the 45 rpm adapter to listen to the 45 rpm vinyl records.
|
- Speed selector
| - Use the speed selector to select the speed (33/45/78 rpm).
|
- On/off dial
Volume dial | On/off dial - Turn the dial clockwise to the "ON" position to switch on the device.
- Turn the dial counterclockwise to the "OFF" position to switch off the device.
Volume dial - Turn the dial clockwise to increase the volume.
- Turn the dial counterclockwise to decrease the volume.
|
- Mode button
| - Press the button to set the mode: Bluetooth / turntable.
|
- Play/pause button
| - Press the button to play or pause the track.
|
- Next button
| - Press the button to select the next track.
|
- Previous button
| - Press the button to select the previous track.
|
- Bluetooth indicator
| - The indicator lights blue in Bluetooth mode.
|
- Headphone jack
| - Connect the headphones to the headphone jack.
Do not use headphones at high volume levels to prevent hearing damage. |
- RCA output (red/white)
| - To use an external amplifier, connect the RCA cable to the RCA output of the device and to the external amplifier. Make sure that each plug of the RCA cable is connected according to the corresponding colour (red/white).
|
- USB port
| USB encoding function - Set the device to turntable mode.
- Connect a USB device to the USB port.
- To start USB encoding, press and hold the mode button.
- To stop USB encoding, press and hold the mode button again.
Note: You can only use the USB encoding function when the device is in turntable mode. You cannot use the USB encoding function when the device is in Bluetooth mode. Playing tracks via USB - Set the device to Bluetooth mode.
- Connect a USB device to the USB port.
- Use the play/pause button and the next/previous buttons to play tracks.
|
- DC input (5V)
| - To power the device, connect the power adapter to the DC input of the device and to the wall socket.
|
- Speaker
| |
- Dust cover
| - If you play vinyl records, open the dust cover.
- If you do not play vinyl records, close the dust cover.
|
Need Assistance?
Do you have a question about the TURN300BK that isn't answered in the manual? Leave your question here.