Nedis TURN210BK - 33/45/78 rpm Bluetooth Turntable Manual
  1. Manuals
  2. Brands
  3. nedis Manuals
  4. Turntable
  5. TURN210BK
  6. User manual

Nedis TURN210BK - 33/45/78 rpm Bluetooth Turntable Manual

Advertisement

Table of Contents
Contents
Nedis TURN210BK - 33/45/78 rpm Bluetooth Turntable Manual

Specifications

  • RMS: 2x3 W
  • Peak power: 2x9 W
  • Bluetooth version: 5.3
  • Bluetooth frequency range: 2400 - 2483.5 MHz
  • Max. RF transmission power: 0 dBm
  • Speed: 33, 45, 78 rpm
  • Turntable type: Manual
  • Type of drive: Belt-drive
  • Connections: RCA output (Red, White)
  • Maximum Playtime: 4 Hours
  • Internal battery: 1200 mAh Lithium-ion

Description (fig. A)

Description

  1. Turntable
  2. Tonearm
  3. Tonearm lifter
  4. Tonearm rest
  5. Tonearm lock
  • Place the vinyl record onto the turntable.
  • Remove the stylus cover by gently sliding the cover away from the tonearm.
  • Push the tonearm lock aside to unlock the tonearm.
  • Use the tonearm lifter to lift the tonearm or manually lift the tonearm.
  • Place the tonearm onto the outer edge of the vinyl record. The turntable starts to rotate and play the vinyl record automatically.
  • Lift the tonearm. Place the tonearm into the tonearm rest.
  • Engage the tonearm lock to lock the tonearm.
  • Remove the vinyl record from the turntable.
Note: Before transport, make sure that the tonearm is locked.
  1. 45 rpm adapter
  • Use the 45 rpm adapter to listen to the 45 rpm vinyl records.
  1. Speed selector
  • Use the speed selector to select the speed (33/45/78 rpm).
  1. Mode switch
  • Set the switch to "TURNTABLE" to set the turntable mode.
  • Set the switch to "BLUETOOTH" to set the Bluetooth mode.
  1. Power indicator
  • The indicator lights red when the device is switched on.
  1. Charging indicator
  • The indicator lights green when the device is being charged.
  1. Bluetooth indicator
  • The indicator lights blue in Bluetooth mode.
  1. On/off dial
    Volume dial

On/off dial

  • Turn the dial clockwise to the "ON" position to switch on the device.
  • Turn the dial counterclockwise to the "OFF" position to switch off the device.

Volume dial

  • Turn the dial clockwise to increase the volume.
  • Turn the dial counterclockwise to decrease the volume.
  1. RCA output (red/white)
  • To use an external amplifier, connect the RCA cable to the RCA output of the device and to the external amplifier. Make sure that each plug of the RCA cable is connected according to the corresponding colour (red/white).
  1. DC input (5V/1.0A)

Fully charge the battery before first use. The charging duration is 2-3 hours.

  • To charge the device, connect the USB cable to the DC input of the device and to the USB port of the USB charger (5V/1.0A).
  • The charging indicator lights green when the device is being charged. The charging indicator goes off when the device is fully charged.
  • If the device is fully charged, disconnect the USB cable from the DC input of the device and the USB port of the USB charger.

Note: The device can be operated during the charging process, but it may take longer to fully charge the device.
  1. Speaker
  1. Suitcase
  • If you play vinyl records, open the suitcase.
  • If you do not play vinyl records, close the suitcase.
  1. Carrying handle

Use

Bluetooth mode

  • Switch on the device.
  • Select Bluetooth mode with the mode switch.
  • The Bluetooth indicator flashes blue. The device is in pairing mode.
  • Activate Bluetooth on your Bluetooth device.
  • Search for new devices on the Bluetooth device.
  • Select the device: "TURN210BK". If a password is required, enter "0000".
  • If the pairing is completed, the LED indicator will light blue.

Replacing the turntable stylus (fig. B)

Replacing the turntable stylus

The turntable stylus lasts for approximately 450 hours under normal operation. It is recommended to replace the turntable stylus as soon as you notice a change in the sound quality. The use of a worn-out turntable stylus can cause damage to the vinyl records. 78 rpm vinyl records will wear out the turntable stylus more quickly than 33/45 rpm vinyl records.

  • Before replacing the turntable stylus, make sure that the device is switched off.
  • Do not bend or touch the turntable stylus.

To remove the old turntable stylus

  • Carefully place a screwdriver at the tip of the turntable stylus and push the turntable stylus downward (A).
  • Remove the old turntable stylus by pulling it down and forward simultaneously.

To install the new turntable stylus

  • Hold the turntable stylus at the front edge and insert the rear edge of the turntable stylus into the tonearm (B).
  • Push the turntable stylus upward to lock it into position (C).

Technical data

Frequency range 2400-2483.5 MHz
Maximum transmission power 4 dBm

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Nedis TURN210BK - 33/45/78 rpm Bluetooth Turntable Manual

Advertisement

Need Assistance?

Do you have a question about the TURN210BK that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Related Manuals for nedis TURN210BK

Save Article as PDF

Table of Contents