Table of Contents
Advertisement
INPUT SETTING
INPUT SETTING
AUDIO SETTING
AUDIO INPUT
OSD SETTING
FACTORY RESET
OSD TIME-OUT
H-POSITION
V-POSITION
LANGUAGE
TRANSPARENCY
INFORMATION
INFORMATION
Select the 「INPUT SETTING」option to change Digital (MINI
DP/DP / HDMI) source. Enter the option and select Digital.
While transferring via the HDMI port, it is recommended to set
AUDIO INPUT to HDMI; if no sound is outputted, it is
recommended to select AUDIO INPUT as PC, and make sure the
PC audio output cable is connected to monitor's LINE IN (or
AUDIO IN) port.
[For HDMI Input only]
Select the 「FACTORY RESET」option to reset to the monitor's
default setting. This will erase the current settings. Enter the
option and select On or Off.
Select 「OSD TIME-OUT」option to set the OSD time out from
10 to 100 seconds. Enter the option and adjust the level.
Select 「H-POSITION」 option to adjust the horizontal position of
the OSD. Enter the option and adjust the level.
Select 「V-POSITION」option to adjust the vertical position of
the OSD. Enter the option and adjust the level.
Select 「LANGUAGE」 option to change the language of the
OSD. Enter the option and select a language.
the OSD Language depends on the selected model]
Select 「TRANSPARENCY」 option to adjust the transparency of
the OSD. Enter the option and adjust the level.
Display Horizontal frequency/Vertical frequency/Resolution
information.
15
User's Manual
[Reference only,
Advertisement
Table of Contents
