Auto Tuning; Atv Manual Tuning; Tuning - Toshiba 40WL753B Owner's Manual

Auto Tuning

NOTE: As new services are broadcast, it will be necessary to
re-tune the television in order to view them.
Auto Tuning will completely re-tune the television and can be
used to update the channel list. It is recommended that Auto
Tuning is run periodically to ensure that all new services
are added. All current channels and settings, i.e. locked
channels, will be lost.
a
Press MENU and use
b
Use to highlight Auto Tuning. Press
SETUP
Menu Language
Country
Ant/Cable In
Auto Tuning

ATV Manual Tuning

DTV Manual Tuning
DTV Settings
Quick Setup
b
A screen will appear warning that previous
programmes and settings will be deleted.
Auto Tuning
Previous settings will be lost!
Press EXIT for no change.
Tuning Mode
Start Scan
C c
Use or to select DTV and ATV, DTV or ATV, if
available, then highlight Start Scan and press
continue with the Auto Tuning.
NOTE: If you have selected "Others" for the Country
field in the SETUP menu, and selected a tuning mode
other than "DTV" , choose the optimum ATV
broadcasting system (B/G, I, D/K or L).
The television will start to search for all available DTV
and/or ATV services.
You must allow the television to complete the
search.
When the search is complete, the Auto Tuning screen
will display the services found.
c
b B
Use or to move through the list to select a
channel, and then press
C c
or to select SETUP menu.
Q
.
English
UK
Antenna
DTV and ATV
Q
Q
to view.
ATV Manual Tuning
The television can be tuned-in manually using ATV Manual
Tuning. For example, you might use the feature if the television
cannot be connected to a media recorder/decoder with a SCART
lead or when you want to tune-in a station on another System.
C c
Use and to move across the screen and select any of the
ATV Manual Tuning options. Then use
settings.
ATV Manual Tuning
System
1 I A
1 2 3 4
1 Position
The number to be pressed on the remote control to tune
the channel.
2 System
Specific to certain areas.
3 Colour System
Factory set to Auto, should only be changed if problems
are experienced, i.e. NTSC input from external source.
4 Skip
8
Set Skip to On (
See page 19
5 Signal Class
The channel classification.
6 Channel
to
The channel number on which a station is being broadcast.
7 Search
Search up and down for a signal.
8 Manual Fine Tuning
Only used if interference/weak signal is experienced. See
page 70.
9 Station
Station identification. Use the
to enter up to seven characters.
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY, and then manually
tune.
17
SETTING UP YOUR TV

Tuning

B b
or to adjust the
C 2 0 V C R
5 6 7 8 9
(
) or Off ( ) for the selected channel.
B b C
or and or
c
buttons