Asus ROG STRIX Z690-E GAMING WIFI Manual page 23

4. Fan and Pump headers
The Fan and Pump headers allow you to connect fans or pumps to cool the system.
When an ASUS HYDRANODE fan is connected to a ASUS HYDRANODE fan
connector, the ASUS HYDRANODE function will be available.
• DO NOT forget to connect the fan cables to the fan headers. Insufficient air flow
inside the system may damage the motherboard components. These are not
jumpers! Do not place jumper caps on the fan headers!
• Ensure the cable is fully inserted into the header.
For water cooling kits, connect the pump connector to the AIO_PUMP header.
CHA_FAN1P can support ASUS HYDRANODE fans.
Header Max. Current
CPU_FAN
CPU_OPT
CHA_FAN1P
CHA_FAN2
CHA_FAN3
CHA_FAN4
CHA_FAN5
AIO_PUMP
ROG STRIX Z690-E GAMING WIFI
This manual downloaded from http://www.manualowl.com
Max. Power
1A 12W
1A 12W
1A 12W
1A 12W
1A 12W
1A 12W
1A 12W
1A 12W
Default Speed Shared Control
Q-Fan Controlled
Q-Fan Controlled
Q-Fan Controlled
Q-Fan Controlled
Q-Fan Controlled
Q-Fan Controlled
Q-Fan Controlled
Full Speed
A
A
-
-
-
-
-
-
1-9