Table of Contents
Advertisement
4.3 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
SATA3 Port
(SATA3_1: see p.20, No. 7)
USB 2.0 Connector
(9-pin USB2_6_7)
(see p.20 No. 5)
COM Port Header (RS232/422/485)
(9-pin COM1: see p.20, No. 6)
* This motherboard supports RS232/422/485 on COM1 port. Please
refer to below table for the pin definition. In addition, COM1 port
(RS232/422/485) can be adjusted in BIOS setup utility > Advanced
Screen > Super IO Configuration. You may refer to our user manual for
details.
PIN
1
2
3
4
5
6
7
8
9
DUMMY
RRXD1
DDTR#1
DDSR#1
1
GND
TTXD1
DDCD#1
COM1 Port Pin Definition
RS232
DCD, Data Carrier Detect
RXD, Receive Data
TXD, Transmit Data
DTR, Data Terminal Ready
GND
DSR, Data Set Ready
RTS, Request To Send
CTS, Clear To Send
N/A
This Serial ATA3 (SATA3)
connector supports SATA data
cables for internal storage
devices. The current SATA3
interface allows up to 6.0 Gb/s
data transfer rate.
There is one USB 2.0
connector on this
motherboard.
CCTS#1
N/A
RRI#1
RRTS#1
RS422
RS485
TX-
RTX-
TX+
RTX+
RX+
N/A
RX-
N/A
GND
GND
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
iBOX 6000 Series
23
Advertisement
Table of Contents
