Factory Reset; Daily Care And Cleaning; Cleaning Agent - Bosch VeroCup 300 TIS3 3 Series Instruction Manual

en Daily care and cleaning
The table shows the allocation of the
levels to the different degrees of water
hardness:
Level Degree of water hardness
German (°dH)
1 1-7
2 8-14
3 15-21
4 22-30
Subsequent changes to the water
hardness can be made at any time.
When using the water filter (see
Note:
section "Accessories"), proceed as
follows ~ "Water filter" on page 15.

Factory reset

If you set the appliance back to the
factory settings, you will lose your own
settings.
Press and hold % and
1.
Calc'nClean for at least 3 seconds.
Touch the "V" button Cappuccino
2.
repeatedly until "Factory reset"
appears.
Confirm by pressing the "ok" button
3.
Latte Macchiato.
The factory settings are activated,
the language selection appears.
Touch the "V" button Cappuccino
4.
repeatedly until the required
language appears on the display.
Touch the "ok" button Latte
5.
Macchiato to confirm the setting.
The appliance rinses and is ready to
use when "Choose beverage"
appears on the display.
18
French (°fH)
1-13
14-25
26-38
39-54
D
Daily care and
cleaning
With good care and cleaning, your
l e a n i n g D a i l y c a r e a n d c
appliance will remain fully functioning
for a long time to come. In this section,
you will learn how to correctly clean and
care for your appliance.
:
Warning
Risk of electric shock!
Before cleaning the appliance, pull out
the mains plug. Never immerse the
appliance in water. Do not use a steam
cleaner.

Cleaning agent

Please observe the following
information to ensure that the different
surfaces are not damaged by using the
wrong type of cleaning agent.
Do not use:
Harsh or abrasive cleaning agents.
■
Any cleaning agents containing
■
alcohol or spirits.
Hard scouring pads or sponges.
■