Cable System Or Vhf/Uhf Antenna System; Cable System And Vhf/Uhf Antenna System - Sony BRAVIA KDL-40W5100 Reference Book

Getting Started Operating the TV
Getting Started > Connecting the TV

Cable System or VHF/UHF Antenna System

You can enjoy high-definition and standard-definition digital programming (if available in your area) along
with standard-definition analog programming. This TV is capable of receiving unscrambled digital
programming for both cable (QAM and 8VSB) and external VHF/UHF antenna (ATSC).
It is strongly recommended that you connect the CABLE/ANTENNA input using a 75-ohm coaxial cable
to receive optimum picture quality. A 300-ohm twin lead cable can easily be affected by radio
frequency interference, resulting in signal degradation.

Cable System and VHF/UHF Antenna System

Use an optional A-B RF switch (not supplied) to switch between the cable and over-the-air
antenna programming, as shown here. Set the Cable/Antenna setting found under the Settings
on the XMB™ to Cable or Antenna for the type of input signal you choose.
Back to Input Signal Reference Chart
Home | Getting Started | Operating the TV | Exploring Fun Features | TV Home Menu | Other Information | Specifications
Exploring Fun Features
> Cable System or/and VHF/UHF Antenna System
Tell us your opinion about this online reference book.
Copyright © 2009 Sony Electronics Inc. All rights reserved.
TV Home Menu Other Information
Cable or VHF/UHF (or VHF only)
Next to HD Cable Box/HD Satellite Box
Specifications