Remington Style Series Manual page 8

ENGLISH
4. Remove the two E-rings one on each side of the head then lift off the upper head
assembly.
5. Unscrew the 2 screws below the upper head assemly then lift the rest of the head off
the body.
6. Pry off the upper decorative panel to expose 2 screws. Remove the screws.
7. Remove the front panel to expose 4 screws. Remove the 4 screws then remove the
back housing.
8. Lift out the battery and printed circuit board assembly.
9. Disconnect he battery from the circuit board.
10. Dispose of the battery safely.
RECYCLING
W
8
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.