About Applications - Axis Q6055-C User Manual

AXIS Q6055-C PTZ Network Camera
Setup
2. Start the application if it is not already running.
3. Make sure you have set up the application according to your needs.
Create an action rule:
4. Go to Settings > System > Events and add an action rule.
5. Type a name for the action rule.
6. From the list of triggers, select Applications and then select AXIS Video Motion Detection (VMD).
7. From the list of actions, select Record video.
8. Select an existing stream profile or create a new one.
9. Set the pre-trigger time to 5 seconds.
10. Set the post-trigger time to 60 seconds.
11. Select SD card from the list of storage options.
12. Click Ok.
How to automatically zoom in on a specific area with gatekeeper
This example explains how to use the gatekeeper functionality to make the camera zoom in automatically on the license plate of a
car that passes through a gate. When the car has passed, the camera zooms out to the home position.
Create the preset positions:
1. Go to Settings > PTZ > Preset positions.
2. Create the home position that includes the entrance of the gate.
3. Create the zoomed-in preset position so that it covers the area in the image where you assume that the license plate
will appear.
Create a motion detection profile:
4. Go to Settings > Apps and open AXIS Video Motion Detection.
5. Create a profile that covers the entrance of the gate and then save the profile.
Create an action rule:
6. Go to Settings > System > Events and add an action rule.
7. Name the action rule Gatekeeper.
8. From the trigger list, select Applications and then select the previously created motion detection profile.
9. From the action list, select the previously created preset position.
10. Click OK.

About applications

AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications
for Axis products. To find out more about available applications, downloads, trials and licenses, go to axis.com/applications
To find the user manuals for Axis applications, go to axis.com
14