Ez Debug Led - MSI B650 GAMING PLUS WIFI User Manual

⚠
CAUTION
Do not connect the wrong type of LED strips. The JRGB connector and the JARGB_V2
connector provide different voltages, and connecting the ARGB 5V LED strip to the
JRGB connector will result in damage to the LED strip.
⚠
Important
If you connect the ARGB Gen1 and ARGB Gen2 LED strips into the same connector, it
∙
may cause some issues. Please do not mix the ARGB Gen1 LED and the ARGB Gen2
LED strips together.
∙ It is recommended that you install LED strips with the same specification to achieve
the best effects.
Always turn off the power supply and unplug the power cord from the power outlet
∙
before installing or removing the addressable RGB LED strip.
Please use MSI's software to control the extended LED strip.
∙

EZ Debug LED

These LEDs indicate the debug status of the motherboard.
LED Color Status
CPU is not detected or fail
Red
Yellow DRAM is not detected or fail
GPU is not detected or fail
White
Green Booting device is not detected or fail
45