Sony BRAVIA KDL-22BX300 Operating Instructions Manual page 50

4
Align the holes on the right Mounting Hook with the corresponding holes on the rear of the
TV.
Secure them to the TV using two screws (supplied with SU-WL100).
Step 6: Installing the TV on the Base Plate
Refer to the Instructions for SU-WL100.
1
Connect the cables to the corresponding inputs on the rear of the TV.
For details on the cable connection, see "Connecting Other Equipment" on page 13.
2
Install the TV onto the Base Plate.
• When using an electric screwdriver to tighten the screws, the torque must be approximately
1.5 N·m (15 kgf·cm). Do not lift the Mounting Hook before the screws (two screws each for
left /right) are secured.
50
Screw
(+PSW 4 × 12)
Mounting Hook