Wide Mode With Pc; Inputs - Sony BRAVIA KDL-22BX300 Operating Instructions Manual

Wide Mode with PC

Wide Mode is also available for the PC
settings. When a PC is connected to the TV
and PC input is selected, you can change the
PC Screen settings.
Screen
PC Settings
Wide Mode
Auto Adjustment
Phase
Pitch
Horizontal Center
Vertical Center
Set Set
To change the Wide Screen Mode for
PC Timing
Press WIDE repeatedly to cycle through the
available modes while in the PC input mode.
Incoming PC signal
800 × 600
m
Normal
Full 1
Full 2
• Use the Auto Adjustment to adjust
the display position and phase of the
picture when the TV receives an input
signal from the connected PC.

Inputs

Press INPUT to display the Input menu and
toggle through the external inputs to select
your video signal for viewing including the TV
mode. The inputs list consists of TV mode and
other equipment connected to the TV.
PC
You can label your external inputs to identify
them easily.
Normal
To Label an Input
0
0
1
0
0
2
3
Press MENU, then select the Setup
settings. Select the Label Video Inputs
option. Press V/v to highlight the video
input (HDMI 1-2, Video, Component
1-2, PC) to which you want to assign a
label; press to select the input of your
choice.
Press V/v to highlight one of the
displayed labels that corresponds to your
connected equipment, then press
If you have an open input where no
equipment is connected, you can label it as
Skip. When you assign Skip, your TV
will skip over this input when you press
the INPUT button. The Skip labeled input
is grayed out in the input list.
.
25