Learning The Commands Of Your Components - Sony STR-DG900 Operating Instructions Manual

To control a tuner
Maker
SONY
To control a Blu-ray disc
recorder
Maker
SONY
To control a PSX
Maker
SONY
90 US
Code(s)
002, 005
Code(s)
310, 311, 312
Code(s)
313, 314, 315
Learning the commands
of your components
By using the Learning function, it is possible
for this remote to perform learned commands.
Setting remote control codes
that are not stored in the remote
When a remote control code is not one of the
presets stored in the remote, it is possible for
the remote to learn the code using the Learning
function.
1
Hold down RM SET UP and
press TV.
The RM SET UP indicator lights up.
2
Press the input button
(including TV) for the
component you want to control.
For example, if you are going to learn an
operation for a CD player, press SA-CD/
CD. The input button indicator flashes.
3
Press the button you want to
use for the Learning function.
The input button indicator lights up.
4
Point the remote control code
receiver section of the remote
towards the receiver/
transmitter on the remote
control to be learned.
5–10 cm