3B: Connecting The Video Components - Sony STR-DG900 Operating Instructions Manual

Notes
• To listen to the portable audio source sound,
connect the audio output jack of portable audio to
the VIDEO 3 IN/ PORTABLE AV IN (AUDIO)
jack of this receiver. For details, refer to operating
instructions supplied with the Portable Audio.
• Distortion may occur when listening to a
component connected to the VIDEO 3 IN/
PORTABLE AV IN (AUDIO) jack on the front
panel of this receiver. This is not a malfunction and
will depend on the component connected. To
prevent this, you can reduce the input level sound
of the other components.
22
US
3b: Connecting the video
components
How to hook up your
components
This section describes how to hook up your
components to this receiver. Before you begin,
refer to "Component to be connected" below
for the pages which describe how to connect
each component.
After hooking up all your components,
proceed to "4: Connecting the antennas" (page
31).
Component to be connected
Component
TV monitor
DVD player/DVD recorder
Satellite tuner
VCR
Camcorder, video game, etc.
With HDMI jack
Video input/output jack to be
connected
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
Page
24
25
27
28
28
29