C7 Checking System Usage (System Reports) - Panasonic KX-TVS80 Installation Manual

SYSTEM MANAGER'S GUIDE
C7 CHECKING SYSTEM USAGE (SYSTEM
REPORTS)
The System Manager can generate 8 System Reports to help monitor the VPS operating status.
The reports are sent from the RS-232C port to either a printer or a terminal. (The System
Administrator is also able to output System Reports.)
Obtaining System Reports
1.
Log in the Main Menu.
2.
Press [5] for the System Report Menu.
3.
Press [1], [2], [3], [4], [5], [6], [7], or [8] to generate the desired report.
• [1] System Service Report
• [2] Flash Memory Usage Report
• [3] Port Usage Report
• [4] Mailbox Usage Report
• [5] Mailbox Parameter Report
• [6] Call Account Report
• [7] Class of Service Parameter Report
• [8] Fax Call Report
Note
The Mailbox Parameter Report is displayed as "Mailbox Assignments". The Class of
Service Parameter Report is displayed as "COS Assignments".
4.
For Flash Memory Usage Report, Port Usage Report, Mailbox Usage Report or Fax Call
Report, Press [1]. To generate the Mailbox Usage Report, Go to Step 5.
5.
Mailbox Usage Report—Type the mailbox number of the start of the range.
Note
If a [#] is entered in place of each digit of the mailbox numbers (e.g., # # # for 3-digit
mailbox numbers), reports for all mailboxes will be printed and the System Report
Menu will appear. In this case, Step 6 can be skipped.
6.
Press [1] to specify the mailbox range and Type the mailbox number of the end of the
range, or Press [2] to obtain all mailbox usage counts. This mailbox number is the end of
the mailbox range. The mailbox number entered in Step 5 is the start of the range. For
318
All manuals and user guides at all-guides.com
Installation Manual