Advertisement
Table 2
LED Status Indications (continued)
Message
Type
Boot loader warnings
Boot loader errors
Cisco Access Point
Operating System
(AP-OS) errors
13
Miscellaneous Usage and Configuration Guidelines
Using the Mode Button
Using the Mode button (see
• Reset the AP to the default factory-shipped configuration.
• Clear the AP internal storage, including all configuration files and the regulatory domain
configuration.
LED State
Blinking Amber
Red
Blinking Green
Red
Blinking Red and
Amber
Blinking Red and off
Red
Cycling through Red,
Green, Amber and off.
Figure
6) you can:
Message
Meaning
Configuration recovery in progress (Mode button
pushed for 2 to 3 seconds)
Ethernet failure or image recovery (Mode button
pushed for 20 to 30 seconds)
Image recovery in progress (Mode button
released)
DRAM memory test failure
FLASH file system failure
One of the following:
• Environment variable failure
• Bad MAC address
• Ethernet failure during image recovery
• Boot environment failure
• No Cisco image file
• Boot failure
Software failure; try disconnecting and
reconnecting unit power
General warning; insufficient inline power
23
Advertisement
