Remington PG5000AU Manual page 7

Multi groom kit
Table of Contents

Advertisement

Fitting and Removing the Adjustable Comb
To fit, line up the rails on the comb with the slots on the sides of the
groomer and slide the comb downwards onto the groomer.
To adjust, press and hold the adjustment button on the back of the
comb and slide the comb up or down. Release the button to lock the
comb at that position. The length of cut is indicated by the scale on the
side of the trimmer.
To remove, press and hold the adjustment button and push the comb
up and off the groomer.
GROOMING TIPS
Comb facial hair with a fine comb before you start trimming.
Comb your hair in the direction that it grows so that the hairs are at
their maximum height and facing in the same direction.
After trimming, lightly go over the trimmed areas with the foil to get a
smooth clean finish.
Since all hairs do not grow in the same direction, you may want to try
different trimming positions (i.e. upwards, downwards or across) for
better results.
Hair should be dry and free from any waxes or lotions.
If hair builds up during use, switch the unit off, remove any attachment
in use and clean any excess hair clippings from the attachment and
groomer.
3-Day Stubble, and Body Hair Maintenance: Wide Trimmer with 1.5mm
Fixed Comb, Body Hair Attachment
3-Day Stubble Look:
Let your stubble grow to a length that is slightly longer than the look you
are trying to achieve.
1.
Fit the 1.5mm fixed comb to the wide trimmer attachment.
2.
Run your trimmer through your beard against the direction of hair
growth.
3.
Tidy the edges of the stubble using the precision trimmer attachment.
For more control over the length of your stubble, you can use the
adjustable comb and trim your stubble down in increments starting at
a longer length setting until you get the desired look.
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Graphite g5 series

Table of Contents