NETGEAR SXK50 User Manual page 108

Orbi Pro WiFi 6 AX5400 Router Model SXR50 and Orbi Pro WiFi 6 AX5400 Satellite Model SXS50
10. A WLAN schedule can turn WiFi broadcast off to block network access during days
and times when it is not needed and to save energy. To enable and configure a
WLAN schedule for the admin WiFi network, do the following:
a. Select the Enable WLAN schedule check box.
The page expands and shows the days and times that the WiFi signal is broadcast.
After you enable the WLAN schedule, by default, the WiFi signal is broadcast
every day from 8:30 a.m. to 6:00 p.m.
b. To change if the WiFi signal is broadcast during a day, clear or select the check
box for the day.
If you clear the check box for a day, the WiFi signal is not broadcast on that day.
c. To change when the WiFi signal is broadcast during a day, move the round icons
on the blue bar to the desired starting and ending times for the day.
The period that the WiFi signal is broadcast during that day displays to the left
of the blue bar.
11. Scroll down to the Authentication Mode section and make sure that the Local radio
button is selected.
12. In the Authentication Options section, either specify an open network or set an
authentication password by doing one of the following:
• None: To specify an open network without authentication, select the None radio
button.
• Password Authentication: To set an authentication password, select the
Password Authentication radio button and specify a password in the field. The
password must be a minimum of 8 characters and can be a maximum of 63
characters (or 64 hexadecimal digits).
Note: In order for guests to access the Internet through the Orbi Pro network,
they must enter this password in the guest portal.
13. To set an expiration time for how long guests can access the Internet, select a time
from the Expiration menu. After guests are authenticated, they can access the
Internet for that period of time.
If you select Never from the menu, guest access time is not restricted to any period.
14. Click the Apply button.
Your settings are saved. The router sends the new settings to the satellite.
Manage the WiFi Networks 108 User Manual