Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
Remove the
base
cover.
Procedure
1. Locate the memory module on the system board and lift the mylar that covers the memory moedules.
2. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory
module pops up.
3. Remove the memory module from the memory-module slot.
Removing the memory modules
computer. After working inside your computer, follow the instructions in
www.dell.com/
Removing the memory modules
11
After
21
Advertisement
Table of Contents
