Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
NOTE:
Hard drive is available only on computers that are shipped with 3-cell battery.
Remove the
base
cover.
Procedure
1. Using the pull tab, disconnect the battery cable from the system board.
2. Remove the four screws (M2x3) that secure the battery to the palm-rest assembly and keyboard shield.
3. Lift the battery off the palm-rest assembly.
4. Turn the computer over, open the display, and press and hold the power button for 15 seconds to ground the system board.
14
Removing the battery
Removing the battery
computer. After working inside your computer, follow the instructions in
5
After
www.dell.com/
Advertisement
Table of Contents
