Table of Contents
Advertisement
Rangetops KMR 1124-3, KMR 113x-3, KMR 135x-3
Position
1) The support base must have a minimum thickness of ³/₄" (19.05 mm).
At the rear right of the support base, a cut-out of 5 1/8" x 7 1/8" (130 mm x 80 mm) must be
provided (gas connection) and, at the rear left, a cut-out of
4 6/8" x 1 9/16" (120 mm x 40 mm) (electrical connection).
Dimensions
13" (330 mm)
18" (457 mm)
7¹/₂" (190.5 mm)
10" (254 mm)
Dimensional drawings
Description
Maximum depth of top cabinet
Minimum distance to bottom edge of
top cabinet
Distance between the top edge of the
countertop and the top edge of the
support base
Minimum distance to combustible
surfaces
1)
Support base
39
Advertisement
Table of Contents
