All manuals and user guides at all-guides.com
Figure 12. Removal steps of LCD unit (continued)
Turn the hinges over to 180 degrees by arrow
Turn the base cover over by arrow
f
by arrow
.
6
When installing:
• Route the touch and eDP cables along the cable guides. As you route the
cables, make sure that they are not subjected to any tension. Tension can
cause the cables to be damaged by the cable guides, or a wire to be broken.
• Make sure that the LCD connector is attached firmly.
Lenovo Flex 2 Pro-15/Edge 15
d
.
4
e
and lift the base cover from the LCD unit
5
4
51