Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Figure 8. Removal steps of fan assembly and heat sink assembly (continued)
For integrated graphic:
Unplug the fan connector in the direction shown by arrow
b
screws
and then remove the fan and heat sink assembly by arrow
Step Screw (quantity)
b
M 2× 4.0 mm, flat‐head, nylok‐coated (3)
When installing: Make sure that the fan connector is attached firmly to the
system board.
Lenovo Flex 2 Pro-15/Edge 15
a
2
2
3
1
Color
Silver
, loosen the three
c
.
Torque
1.85±0.15kgfcm
45
Advertisement
Table of Contents
