LG 27HK510S-W.AWP Owner's Manual page 24

[General]
1
Press to activate the LED Control Button. When the LED Control Button is activated, press
2
Among the LED Control Button, press
3
Configure the options following the instructions that appear in the bottom right corner.
4
To configure an upper menu or another item, press the LED Control Button
5
In order to exit from the OSD Menu, press the LED Control Button
The applicable setting options are as shown below.
[All Settings] > [General]
[Language] Sets the menu screen to the desired language.
[SMART ENERGY SAVING] Conserve energy by using luminance compensation algorithm.
[High]
[Low]
[Off]
[HW Calibration] [RS-232C] and the [HW Calibration] cannot be used at the same time.
[On]
[Off]
[RS-232C] [RS-232C] and the [HW Calibration] cannot be used at the same time.
[Serial Port]
[Set ID]
24
to move to the left or right or
or press
or press .
Saves energy using the high-efficiency [SMART ENERGY SAVING] feature.
Saves energy using the low-efficiency [SMART ENERGY SAVING] feature.
Disables the [SMART ENERGY SAVING] function.
The HW Calibration function will operate.
The HW Calibration function will be turned off.
The [RS-232C] function will be operated or turned off.
Adjusts [Set ID]. (The scope of adjustment: 1-10)
and select [All Settings] to show the complete OSD Menu.
to move to the bottom or top to go to the [General].
to move to the settings.
Explanation