Parental Control Settings - Sony PS2 SCPH-90006 Quick Reference

Parental control settings

Setting parental control restrictions
From the control panel, select (Setup) t "Custom Setup" t "Parental
Control".
Follow the on-screen instructions to register or enter the password. After the
password is registered or entered, proceed through the various screens to select a
region or parental control level.
Hints
• If you select "Other" in the region options, refer to the User's Guide for a list of
region codes.
• For the parental control level, note that the lower the value, the stricter the
restriction.
• To clear the parental control setting, set the option to "Off".
• To change your password, select "Change Password" from the parental control
options and follow the on-screen instructions to complete the operation.
Temporary override of parental control restrictions
Start DVD playback. When prompted by the system, select "Yes", and then enter the
password.
Hints
• You cannot change the parental control setting without a password.
• When DVD playback is stopped, the parental control level will return to its default
setting.
• If you forget your password, see "Troubleshooting" (
When using a cable other than the supplied AV
cable
Picture quality varies depending on the type of cable used. Use the information
below to determine the best connection method. If you use a cable other than the
supplied AV cable, refer to the instructions supplied with the cable.
TV
A TV with S VIDEO inputs
A TV with component video input connectors Component AV cable (SCPH-10490)
Picture quality scale
x AV cable (supplied)
This scale is intended only as a reference. Depending on the product or condition of
your TV, the picture quality may be different.
page 16).
Cable type
S VIDEO cable (SCPH-10480)
High quality
x S VIDEO cable x Component AV cable
EN
13