Table of Contents
Advertisement
Quick Links
OWNER'S MANUAL
VACUUM CLEANER
Before beginning installation, read these instructions
carefully. This will simplify installation and ensure that the
product is installed correctly and safely. Leave these
instructions near the product after installation for future
reference.
ENGLISH
A9K*********
MFL67847157
Rev.01_122622
Copyright © 2022 LG Electronics Inc. All Rights Reserved.
www.lg.com
Advertisement
Table of Contents
Related Manuals for LG CordZero A9K-CORE.BIGGNAG
Summary of Contents for LG CordZero A9K-CORE.BIGGNAG
- Page 1 This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference. ENGLISH A9K********* www.lg.com MFL67847157 Rev.01_122622 Copyright © 2022 LG Electronics Inc. All Rights Reserved.
-
Page 2: Table Of Contents
OPERATION Getting Started ....................20 Charging the Battery ..................22 Using the Mop Nozzle ..................23 Using the Nozzles and Tools................26 SMART FUNCTIONS Using LG ThinQ Application................30 Smart Diagnosis Function................32 MAINTENANCE Cleaning the Appliance ...................33 Cleaning the Nozzles ..................36 TROUBLESHOOTING Before Calling for Service................40... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below. Safety Messages This symbol is displayed to indicate matters and operations that can cause risk. - Page 4 If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to an LG Electronics service centre. • Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
- Page 5 SAFETY INSTRUCTIONS • When disposing of this appliance, follow regulations for disposal of rechargeable lithium-ion batteries. • Follow all local ordinances and regulations when handling or disposing of the battery. • Prevent unintentional starting. Ensure the switch is in the off position before connecting to the battery pack, picking up or carrying the appliance.
- Page 6 SAFETY INSTRUCTIONS • Install, charge and store the appliance in a well-ventilated place. • Avoid operating the appliance in areas where there is a risk of leakage of flammable gas, industrial oil or metallic dust. • Do not store or install the appliance, power cord or plug near heating devices or open flames.
- Page 7 • Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. Take it to an authorized LG Electronics service centre or dealer for assistance. • Do not apply excessive force to the power cord to bend it, or place it under a heavy object as this will damage it.
- Page 8 • If the earth leakage breaker is tripped when the product is put on the charging station, immediately remove the appliance from the charging station. Contact an LG Electronics customer service centre. • Use extra care when cleaning on stairs.
- Page 9 SAFETY INSTRUCTIONS • In the event of a gas leak(natural gas, propane gas, etc.), do not operate this or any other appliance. Open a window or door to ventilate the area immediately. • Do not hold the charging station upside down with the battery in the charging station.
-
Page 10: Caution
For more detail information about disposal of your old batteries, please contact your city office, waste disposal service or the shop where you purchased the product. Also You can contact our LG Support Representative Call center from below Link https://www.lg.com/sa_en/support/contact/telephone Mop Nozzle •... - Page 11 SAFETY INSTRUCTIONS • Do not install wet or damp filters. • Always use a soft cloth to clean the appliance. Do not clean the product with a volatile or organic solvent(thinner or acetone). • Do not clean the same spot repeatedly for an extended period of time.
-
Page 12: Installation Product Overview
INSTALLATION INSTALLATION Product Overview The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. Front View *1 This feature is only available on some models. Charging Station Tool Holders Spare Charging Station... - Page 13 INSTALLATION Accessories Nozzles *1 This accessory is only available on some models. Included Accessories Multi-Surface Nozzle Slim Hard Floor Nozzle Bedding Nozzle Pet Nozzle Installation Kit Charging Station Extension Pipe Adapter Wall Anchoring Block Pre-filter Double-Sided Tape Battery (Dual Battery Drywall Anchor Floor Stand Dock Wall Anchoring Screw...
- Page 14 Measuring Cup Flexible Hose Extension NOTE Accessory Bag • The mop pads, batteries, exhaust filter and the pre-filter will eventually need to be replaced. Mop Kit Contact an LG Electronics customer service centre. Specifications Appliance Model A9K********* Dimensions (Width X...
- Page 15 Individually measured data would be different from a lab test result. • Battery run time is the result of using a fully charged battery according to the LG Electronics test standard. Results may be different depending on actual use environment and period of use.
-
Page 16: Installing The Charging Station
INSTALLATION Installing the Charging Assemble the charging station onto the top of the floor stand pipe. Station Self-Standing Installation Follow the steps below to install the charging station on a hard and level floor. Place the floor stand dock on a hard and level floor and assemble the floor stand pipe. - Page 17 INSTALLATION to the wall by tightening the anchoring screw Attach the second piece of double-sided tape all the way. to the other side of the wall anchoring block to secure it to the wall. • Do not use double-sided tape on wallpaper. Plug the power cord into the power outlet.
-
Page 18: Storing The Accessories
INSTALLATION • If screwing into drywall, use the drywall Separate the extension pipe and nozzle from anchors. the product body before charging or storing the appliance. Plug the power cord into the power outlet. CAUTION Attach the charging station to the wall with the •... - Page 19 INSTALLATION Storing the Nozzles Storing the Mop Pads When a nozzle is not in use, store it in the Up to 2 mop pads can be stored in the detachable convenient detachable nozzle storage so you can mop pads storage. easily find it.
-
Page 20: Operation Getting Started
The nozzles and tools can accumulate on the appliance. Please contact LG also be attached to the end of the extension Electronics customer information centre if the pipe problem persists. - Page 21 • This indicator blinks when the appliance is Suction Power Up (+) Button / Turbo Mode connecting to the LG ThinQ application or • Press the + button to increase the suction home Wi-Fi network, and the indicator lights up when the connection is complete.
-
Page 22: Charging The Battery
OPERATION • As the product is charging, bars light up on • If you don't hear a beep, reload the the battery level indicator to indicate the level appliance on the charging station. of charge. • Once the battery is fully recharged, 3 bars will remain lighted on the battery level indicator. -
Page 23: Using The Mop Nozzle
• Do not use a soiled mop pad to clean floors. • If you use the mop nozzle for a long time with the • Use only authorized LG Electronics mop pads. suction off, the motor may overheat • Empty the dust bin and clean the exhaust filter (recommended duration of use: 80 minutes). - Page 24 OPERATION Open the water inlet cap on the side of the • Attaching and using mop pads while they water tank and fill the tank with water using are dry may affect the cleaning results. the measuring cup • Open only one water inlet cap to fill the water.
- Page 25 OPERATION position. This stops the supply of water so you • After cleaning, wipe off any remaining water on can go over areas that are already wet. the water supply inlet on the mop nozzle with a soft cloth. The water could drip onto the floor WARNING and damage it.
-
Page 26: Using The Nozzles And Tools
OPERATION nozzle, making it difficult to operate, causing CAUTION damage to the mat or static electricity on the appliance. Clean mats using the crevice tool. • Do not use as follows, as it may become deformed. - Do not use bleach or fabric softener when washing the mop pads. - Page 27 OPERATION Bedding Nozzle • Brush Mode Use the tool in the brush mode to clean delicate This nozzle lets you clean sheets and bedding more surfaces such as frames or furniture. effectively. It removes dust in bedding using strong - To convert modes, press the adjustment suction and a punching motion.
- Page 28 OPERATION Multi-angle Tool vehicles or in narrow spaces under and behind furniture where an angled tool is needed. This tool has a soft brush that can be adjusted to a variety of angles, making it especially useful for cleaning vehicle consoles or the tops of furniture. Using the Brush To convert the tool from crevice to brush mode, press in on the sides of the brush head...
- Page 29 OPERATION NOTE • Do not force the Kompressor lever down if it does not travel down all the way or feels obstructed. Doing so can break the lever. If it cannot be pushed down, the cyclonic filter must then be removed and cleaned and dust tank checked for any obstructions.
-
Page 30: Smart Functions
• Filter Cleaning Guide smartphone. - Guide to cleaning the filters. • Smart Diagnosis™ Run the LG ThinQ app and sign in with your existing account or create an LG account to - This function provides useful information for sign in. - Page 31 Internet service provider or refer to your The appliance is connected to Wi-Fi. wireless router manual. • LG ThinQ is not responsible for any network The appliance has been connection problems or any faults, disconnected. malfunctions, or errors caused by network Connecting the Appliance Initially connection.
-
Page 32: Smart Diagnosis Function
LG ThinQ application. Press the Wi-Fi button for 3 seconds again. • Launch the LG ThinQ application and select the • After the icon turns off, wait for a while and Smart Diagnosis feature in the menu. Follow turn it on again. -
Page 33: Maintenance
MAINTENANCE MAINTENANCE Cleaning the Appliance battery from the product body and remove the foreign objects before resuming use of the appliance. Before Cleaning the Appliance • Check the inside of the product body, above the To maintain the optimum suction power, the Kompressor working plate, the extension pipe, cyclonic mesh filter, the exhaust filter and the pre- inlets, exhaust filter, pre-filter and cyclonic mesh... - Page 34 MAINTENANCE Remove the battery from the product body • Do not force the Kompressor lever down if before cleaning the dust bin. foreign objects are caught around the working plate of the Kompressor system. Doing so may cause product damage. Push down the Kompressor lever several times to collect and compact the dust from the...
- Page 35 MAINTENANCE Cleaning the Filters Turn the product body over and lift the Kompressor lever up to clean the inside of the working plate with the provided cleaning Clean the exhaust filter and the pre-filter when the brush. filter cleaning icon lights up.
-
Page 36: Cleaning The Nozzles
MAINTENANCE • Do not wash the motor with water. the nozzle starts to operate during cleaning, it could cause an injury. • Keep fingers away from pinch points when assembling the nozzle on the appliance or the rotating brush on the nozzle. •... - Page 37 MAINTENANCE Attach the crevice tool to the product body and Turn the nozzle upside down and remove the use the vacuum to remove foreign objects and rotating brush while holding down the PUSH dust from the brush and the bottom of the button on the nozzle.
- Page 38 MAINTENANCE Cleaning the Pet Nozzle Insert the left side of the brush into the groove inside the nozzle. Press the nozzle release button to remove the nozzle from the extension pipe or product body. Press the cover of the brush to lock the brush until a clicking sound is heard.
- Page 39 MAINTENANCE Use a damp towel or cloth to remove any remaining foreign objects and dust from the bottom of the mop nozzle. Remove foreign objects, debris and hair from all Rollers of the nozzles using tweezers.
-
Page 40: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING Before Calling for Service Operation Symptoms Possible Cause & Solution The appliance does not Battery is fully discharged. operate. • Charge the battery. Appliance is turned off. • Press the Power button to turn on the appliance. Suction power is too Dust bin is full of dust. - Page 41 LG customer information centre for service. repeatedly. Foreign object is in the product body, extension pipe, inlet port or nozzle.
- Page 42 TROUBLESHOOTING Symptoms Possible Cause & Solution The mop pad Mop nozzle is pressed too hard against the floor. attachment plate does • The mop attachment plate stops automatically to protect the product. This not rotate. is not a failure. Attach the mop pads securely to the mop attachment plate and press the power button to resume use.
- Page 43 Your home appliance Battery is fully discharged. and smartphone are • Charge the battery, then register your appliance on LG ThinQ. not connected to the Wi-Fi network. The password for the Wi-Fi that you are trying to connect to is incorrect.