Advertisement
Quick Links
BEFORE YOU BEGIN
BEFORE YOU BEGIN
A. Introduction
!
Please read these instructions carefully to
familiarize yourself with the required tools, materials,
and installation sequences. Follow the sections that
pertain to your particular installation. This will help
you avoid costly mistakes. In addition to proper
installation, read all operating and safety instructions.
!
All information is based on the latest product
information available at the time of publication.
Kohler Co. reserves the right to make changes in
product characteristics, packaging, or availability at
any time without notice.
!
These instructions contain important care, cleaning,
and warranty information-please leave these
instructions for the consumer.
B. Installer Hazard Notification
CAUTION!! Risk of personal injury.
Cast iron baths are extremely heavy, and need
at least 3 persons for help. Wear appropriate
safety equipment when installing these products.
C. The following instructions must be
followed to avoid any potential damage
to the surface of the enamel.
CAUTION!! The surface of the enamel will be
damaged if the following instructions are not
followed.
!
Keep sharp-ended objects or tools away from the
bathtub during transportation.
!
Cover the edge and bottom of the bath with
transparent plastic cloth to protect it from being
spotted by dirt and silicon during installation.
!
Install the bath at the proper position.
1150366-T01-A
FREESTANDING BATH WITH STAINLESS FOOT AND TOWEL RACK
A.
!
!
!
B.
C.
!
!
!
368
-1-
INSTALLATION INSTRUCTIONS
3
201419
Copyright Kohler China Ltd., 2010
LOVEE
K-9289T/K-9271T
, 2010
Advertisement
Related Manuals for Kohler LOVEE K-9289T
Summary of Contents for Kohler LOVEE K-9289T
- Page 1 All information is based on the latest product information available at the time of publication. Kohler Co. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice.
-
Page 2: Product Requirements
PRODUCT REQUIREMENTS PRODUCT REQUIREMENTS A. Summary Of Key Requirements Observe all local plumbing codes. Install the bath tub to a level floor. Provide properly-dimensioned space. Make sure the flooring offers adequate support for your bath. Observe all local plumbing and building codes. B. -
Page 3: Site Requirements
SITE REQUIREMENTS SITE REQUIREMENTS A. Old Bath Removal (if necessary) B. Preparation Note: Adequate floor support must be provided. Refer to roughing-in sheet packed with your bath for specific floor loading requirements. Make sure the floor offers adequate support for your bath and verify that the subfloor is flat and level. - Page 4 Install the stainless steel pipe and the fixing plate Install and fix the four stainless steel pipes and four fixing plates according to the picture. Fixing Plate Step 1: Insert the fixing plate into the square tube. M5 Screw + Square Tube 5mm Spring Gasket Step 2: Insert the square tube...
- Page 5 Install the plumbing Install the bath drain. Please refer to the installation K-15995T instruction of Bath Drain K-15995T. Don't fix the drain tail piece first. Turn on the cold and hot supply, and then check all the connections to see whether there is any leakage. Run water, and then check the drain connection to see whether there is any leakage.
-
Page 6: Important Consumer Information
Kohler bathtubs. NOTICE: All housekeeping and maintenance employees must be trained in the proper cleaning of Kohler bathtubs. Post a copy of this notice in a readily- visible location. DO NOT use steel wool, wire brushes, metal scrapers or abrasive sponge pads to clean a Kohler bath tub.