Table of Contents
Advertisement
System Boot Order Check
After replacing a damaged/defective hard drive and prior to recovering the
image from the recovery DVD verify that the DOS boot order is as follows:
• CDROM
• Floppy drive
• Hard drive
Checking the PC BIOS
Step
1 Turn on or restart your PC. At the first DOS
2 Use the down arrow button to highlight
3 Press the "Enter" button.
4 Use the down arrow button to highlight
5 Press the "Enter" button.
6 Use the down arrow button to select
7 Press the "Enter" button.
8 Use the down arrow button to highlight
9 Press the "Enter" button.
10 Use the down arrow button to select
11 Press the "Enter" button.
12 Verify that the "Third Boot Device" is the
13 Press the Escape (Esc) button
14 Use the down arrow button to highlight
15 Press the Escape (Esc) button
16 Press the "F10" button to save the changes.
17 Press the "Enter" button to "Save to CMOS
E5505A Installation Guide
screen, press the Delete [DEL] key to enter
the CMOS setup utility screen.
"Advanced BIOS Features"
"First Boot Device"
"CDROM"
"Second Boot Device"
"FLOPPY"
hard drive (HDD-0)
"Power Management Setup". Press the
"Enter" button.
and Exit"
Notes
®
"CMOS Setup Utility" appears
"Advanced BIOS Features" appears
Selects the CDROM as the
Verify that the "Power Supply Type" is ATX.
5
Recovery
65
Advertisement
Table of Contents
