Adjusting Your Monitor Image; Using Direct Access Controls - Lenovo ThinkCentre TIO Flex 24v User Manual

Adjusting your monitor image

Using direct access controls

2-3 TIO Flex 24v Flat Panel Monitor User's Guide
This section describes the control features to adjust your monitor images�
Direct access controls can be used when the On-Screen Display (OSD) is not displayed�
Icon Name
Enter key
Right key
1�
Left Key
Down Key
Up Key
Input Source
2�
Smart Traffic Light
3�
Power button
Telephone switch &
LED
Volume down &
LED
Volume up & LED
Microphone mute &
LED
Note: To enable the Mute and Hook buttons, you need to connect USB-B and select a USB audio (Echo
Canceling Speakerphone) device�
Description
• Press to open main menu while there is no any OSD on the screen�
• Press to enter next level on main menu or sub menu, or enter previous
level on adjustment bar�
• Press and hold for 10 seconds, then the OSD will be Lock/Unlock�
• Press to enter next level on main menu or sub menu�
• Press to open Language select menu while there is no any OSD on the
screen�
• Press to exit current OSD or return to previous level�
• Press and hold for 10 seconds, then the DDC/CI function will be Enabled/
Disabled�
• Press to move to next item on menu�
• Press to decrease current value on adjustment bar�
• Press to open Contrast menu while there is no any OSD on the screen�
• Press to move to last item on menu�
• Press to Increase current value on adjustment bar�
• Press to open Brightness menu while there is no any OSD on the screen�
It is a shortcut key for directly opening the menu of input source while there
is no any OSD on the screen�
Press and hold for 3 seconds, then the Smart Traffic Light function will be
Off/On�
Turns the monitor on/off� White indicates power on� Orange indicates
standby/ power saving mode�
• LED will blink in green when there is an incoming call�
• LED will light up in static green during call�
• Short press to answer / end call�
• Long press to reject incoming call�
Note: This feature can only be used with the Teams app�
• Short press to decrease volume�
• Long press the volume to continuously decrease�
• Short press to increase the volume�
• Long press to keep volume up�
• Press to mute and unmute the microphone�
• When the microphone is muted, the LED lights up static red�
• LED switches off when microphone is enabled/unmuted�