Setting Up Your Monitor; Assembling Your Monitor - Lenovo ThinkCentre TIO Flex 24v User Manual

Setting up your monitor

Assembling your monitor

1-7 TIO Flex 24v Flat Panel Monitor User's Guide
This section provides information on how to set up your monitor�
To assemble your monitor, follow the two parts below one by one:
Part 1: Install the full-function monitor stand�
Part 2: Install the Tiny
Part 1: Install the full-function monitor stand�
Note: The full-function monitor stand includes one monitor stand and one stand base�
1� Place a soft, clean towel or cloth on the desk or surface� Hold the sides of your monitor and gently
lay it down so that the screen is against the surface and the cover is facing up�
2� Insert the two metal tabs on the stand into the corresponding holes on the rear of the monitor�
Then, pivot the stand downward until it clicks into position�
3� Insert the three metal studs on the base into the corresponding holes in the stand� Then, tighten the
screw as shown to secure the stand�
2
1
1
2