Troubleshooting - King Canada 8488c Instruction Manual

TROUBLE
No start condition Fuse blown or circuit breaker tripped
Loose electrical connections
Overheated motor
Low pressure Air leak in safety valve
Restricted air filter
Defective check valve
Safety valve releasing Defective pressure switch or improper
adjustment
Oil discharge in air Improper oil viscosity
Too much oil in crankcase
Compressor overheated
Restricted air filter
parts Diagram & parts lists
Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list.

troUblesHooting

troUble sHooting
POSSIBLE CAUSE CORRECTIVE ACTION
Check voltage or eliminate extension cord or reset
Check wiring connections
Wait for motor to cool, then press the reset button, restart
Check valve manually by pulling upwards on ring. If condition
persists replace valve
Clean or replace as necessary
Replace check valve
Check for proper adjustment and if problem persists, replace
pressure switch
Replace oil with SAE 30 non-detergent oil
Drain crankcase and fill to proper level
Air pressure regulated too high
Replace filter