Table of Contents
Advertisement
To call up the desired parameter:
Press the [FUNCTION] button several times to select "System" menu, then use the [
parameter.
[>]
[>]
[<]
[<]
MIDI
Local Control
Receive Param. (Setting display) Determines which types of MIDI messages can be
Transmit Param. (Setting display) Determines which types of MIDI messages can be
Initial Setup
Cancel
Execute
Backup
Backup Setting
Backup
Restore
Factory Set
Utility
USB Format
Cancel
Execute
[>]
Description
[<]
–
"Local Control On" is a state in which this instrument
produces the sound from its tone generator when you
play the keyboard. In "Local Control Off" state, the
keyboard and the tone generator are cut off from each
other. This means that even if you play the keyboard,
this instrument will produce no sound. Instead, the
keyboard data can be transmitted via MIDI to a
connected MIDI device or computer, which can
produce the sound. The "Local Control Off" setting is
useful when you wish to play only an external sound
source while playing the keys on this instrument.
received or recognized by this instrument.
MIDI message types:
Note on/off, Control Change, Program Change, Pitch
Bend, System Exclusive
transmitted from this instrument.
MIDI message types:
Note on/off, Control Change, Program Change, Pitch
Bend, SystemRealTime, System Exclusive
Transmits the current panel settings such as Voice
selection to a connected MIDI device or computer.
Before you start recording your performance to a
connected MIDI device or computer, execute this
operation to record the current panel settings at the
beginning of your performance data. It causes that the
same panel settings are called up when the recorded
performance is played back.
Operation:
Move the highlight to "Execute," then press the [>]
button to transmit the panel settings as MIDI messages.
–
For instructions about these functions, refer to pages 92
– 93.
–
–
–
This lets you format or initialize the USB flash drive
connected to the USB [TO DEVICE] terminal.
NOTICE
Executing the Format operation will delete all data saved in
the USB flash drive. Save important data to a computer or
another storage device.
NOTE
When connecting the USB flash drive to the USB [TO DEVICE]
terminal, a message prompting you to execute the Format
operation may appear. If such a case occurs, execute the
Format operation.
Operation
Move the highlight to "Execute," then press the [>]
button to start the Format operation. After Formatting is
completed, a message appears then the instrument
returns to the Utility display after a while.
NOTICE
Never turn off the power or disconnect the USB flash drive
while "Executing" is shown in the display.
]/[
]/[<]/[>] buttons to select the desired
u
d
Default setting
Setting range
On
On, Off
On (for all the
On, Off (for each
MIDI messages)
MIDI message)
On (for all the
On, Off (for each
messages)
message)
–
–
–
YDP-184 Owner's Manual
System Menu
–
–
–
89
Advertisement
Table of Contents
