Electrical Information; Hard Wiring Connection; Receptacle Wiring Diagram; Electronic Wiring Diagram - Napoleon Altitude AX36NTE-1 Installation Manual

Table of Contents

Advertisement

Available languages

Available languages

5.0 electrical information

electrical information
EN
5.1

hard wiring connection

It is necessary to hard wire this appliance.
This appliance must be electrically connected and grounded in accordance with local codes. In the absence
of local codes, use the current CSA C22.1 Canadian Electrical Code in Canada or the ANSI/NFPA 70 National
Electrical Code in the United States.
5.2

receptacle wiring diagram

L1 (Black)
Cable connector
5.3

electronic wiring diagram

WARNING
!
Do not use this appliance if any part has been under water. Call a qualifi ed service technician immediately to
have the appliance inspected for damage to the electrical circuit.
Risk of electrical shock or explosion. Do not wire 110V to the valve or to the appliance wall switch. Incorrect
wiring will damage controls.
All wiring should be done by a qualifi ed electrician and shall be in compliance with local codes. In the
absence of local codes, use the current CSA22.1 Canadian Electric Code in Canada or the current National
Electric Code ANSI/NFPA NO. 70 in the United States.
Always light the pilot whether for the fi rst time or if the gas supply has run out, with the glass door opened or
removed.
5.4

eFIRE Controller application

Napoleon's eFIRE application will revolutionize the way you use your fireplace! We have cracked the code and
present to you the first fireplaces to be controlled by Bluetooth technology, using an intuitive app on your mobile
device.
When fully equipped (if applicable), the eFIRE application allows you to select from a multitude of colours to suit
your mood or décor simply by scrolling through the colour wheel. Additionally, Napoleon's eFIRE application allows
you to control many other functions of your fireplace, including on/off, flame height, light feature, blower, and a
timer to create a schedule for your fireplace that works for you.
Using the instructions on the eFIRE Controller application website http://napoleonfireplaces.com/efire, install
the application and enjoy the features the eFIRE Controller application has to offer. *
* Visit the website or contact your authorized dealer for appliance-specific information and/or frequently asked
questions regarding features and products available with the eFIRE Controller application.
note:
The remote control is considered the master control for the appliance and can always be used to turn the
appliance off (ex. the eFIRE Controller application user, in control of the appliance, leaves the home).
30
W415-3150 / B / 03.15.23
Electrical box
cover
Screw
Ground
L2
(Green)
(White)
3 prong
receptacle
(Black)
(White)
Wire nuts
Ground
(Green)
43.1
Electrical
box

Advertisement

Table of Contents
loading

Table of Contents