Midland HP108 Manual page 21

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 19
HP108/408
Reliable, sturdy and light-weight!
Alan HP 108/408 represents the new generation of VHF/UHF transceivers,
suitable for professional purposes and useful in any situation where reliable
communications are needed.
HP108/408 is supplied with many functions, such as 'Busy Channel Lock Out',
memory channels, tx power selectable to 5W (high); some of its features are
programmable to customize the equipment according to your needs.
Main features
› Frequency band (according to the model):
VHF 136/174MHz – UHF 400/470MHz and 465/520MHz (export version)
› Operating mode: VHF-VHF or UHF-UHF depending on the version
› Output power: 5W VHF/ UHF
› Memory channels: HP108: 256 - HP408L: 298 - HP408H: 180
› 50 CTCSS tones and 107 DCS codes
› Channel spacing: 12,5KHz
› Frequency or channel displayed
› VOX function
› Scan function
› Selectable tx power: high (5W)
› Li-Ion battery pack 7,4V 1600mAh
› Busy channel lock out (BCLO)
› Tx power level indicator on the display
› Scrambler 1/8 levels or voice compressor
› TOT (Time out timer)
› Selective call 5 tones and 5+5
› Squelch
› Battery save
The package includes:
› HP108/408 transceiver
› antenna
› Li-Ion battery pack
› desktop charger
› adaptor
› 1 belt clip
› user manual
If any of the above-described parts are missing, ask your retailer.
Warning
! Before using the transceiver, enquire about the local rules concerning
the use of VHF/UHF equipments.
! Do not attempt to open the radio. You may damage it and therefore
invalidate the warranty.
! Do not handle the transceiver by its antenna!
! Do not transmit without antenna.
! Do not wet the radio or use it next to water sources; humidity may cor-
rode the electronic circuits.
! Turn off the radio while parked in a gasoline service station.
! Do not expose the equipment to excessive vibrations or direct sunlight
for a long time.
! In case the radio diffuses smell or smoke, switch it off immediately and
remove the battery.
! Turn off the transceiver before entering an inflammable and explosive
environment.
! To avoid any possible damages to the equipment, use only original
accessories.
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp408

Table of Contents