Rollover Detection Disable Button - GMC Silverado 2022 Manual

Chevrolet/GMC Silverado/Sierra/Sierra Denali 2500 HD/3500 HD Owner
Manual (GMNA-Localizing-MidEast-16504136) - 2023 - CRC - 6/8/22
66 Seats and Restraints
include airbag modules and possibly other
parts. The service manual for the vehicle
covers the need to replace other parts.
The vehicle has a crash sensing and
diagnostic module which records
information after a crash. See Vehicle
Data Recording and Privacy 0 377 and
Event Data Recorders 0 378.
Let only qualified technicians work on the
airbag systems. Improper service can
mean that an airbag system will not work
properly. See your dealer for service.

Rollover Detection Disable Button

Some extreme off-road driving activities,
such as rock climbing and driving on sand
dunes, may place the vehicle at an extreme
angle. Depending on other driving
conditions, operating the vehicle on extreme
angles may deploy the rollover roof-rail
airbags, even if the vehicle does not roll
over. If equipped, the rollover detection
disable button can be used to temporarily
turn off the rollover detection system that
deploys the roof-rail airbags and seat belt
pretensioners when the vehicle is about to
roll over on its side.
If equipped, the rollover detection disable
button will be on the center stack in either
the first, second, or third position.
Warning
The rollover detection disable button will
disable deployment of the roof-rail
airbags and seat belt pretensioners in the
event of a vehicle rollover.
You can be seriously injured or killed in a
rollover event if deployment of the
roof-rail airbags and seat belt
pretensioners is disabled. See Airbag
System 0 61.
When the vehicle is first started, all vehicle
airbags and the seat belt pretensioners are
automatically enabled. To manually turn off
the rollover detection system so that the
roof-rail airbags and the seat belt
pretensioners will not inflate during a
rollover event:
1. Turn the ignition on.
2. Press and hold the rollover detection
disable button until a beep sounds. The
rollover detection system status indicator
in the overhead console will come on
and stay on when the rollover detection
system is turned off. See Rollover
Detection System Status Indicator 0 120.
When the rollover detection system is
turned off, the roof-rail airbags and seat belt
pretensioners will not deploy in a rollover
event. The roof-rail airbags and seat belt
pretensioners will still deploy in moderate to
severe side and frontal impacts, and the seat
belt pretensioners will still deploy in a
moderate to severe rear impact.
To turn the rollover detection system back
on, turn the ignition off or press and hold
the rollover detection disable button until a
beep sounds. When the rollover detection
system is turned back on, the rollover